6" x 6" 90 Degree Square Duct Elbow — $75.27
- Width: 6"
- Depth: 6"
- Angle: 90°
- Gauge: 26 ga
- Material: Galvanized steel
- Connections: Slip & drive
- Fabrication: Made to order in Pittsburgh, PA
Custom fabricated 6" x 6" square-throat 90 degree elbow in 26-gauge galvanized steel, slip-and-drive both ends. Mitred and riveted, made to order.
About this size
This page is the 6" x 6" 90 Degree Square Duct Elbow configuration of our 90 degree square duct elbow. It is cut and formed for this order — nothing here is a stock import part. The configurator above is loaded with these exact dimensions, so you can add it to the cart as-is, or change a dimension and it re-prices instantly.